InfiniSource ETC 100, Hardware Manual

Page: 35 / 234

TimeForce II Hardware Guide 23
IntelliClock Setup Instructions
IntelliClock Setup Instructions
IntelliClocks have all the basic Time & Attendance features of the ETC
100 clock model, as well as the option for Departmental, Quantity, and
Tips entry, plus Job and Task tracking. These premium options are pur-
chased separately so that you may configure the clock to suit your
needs. If you do not purchase an option with the clock, but decide to add
it later, you may do so at any time. Contact the Infinisource Sales
Department to enable options on your IntelliClock.
The Bell/Buzzer, Daisy, and Modem options can also be used with Intel-
liClocks. Contact an Infinisource Sales Representative if you wish to
use one of these options with your IntelliClock. In addition, the IQ 1000
model features biometric capabilities. Employees clock in using a bar
code, magnetic card, or keypad entry, then verify their identity using
finger template identification.
IntelliClocks are available with the following communication options,
Serial, Serial Daisy, Modem, Ethernet, and Wireless. Each clock model
is explained in more detail later in this chapter.
Creating a Time Clock Profile
Before the ClockLink utility will be able to connect to your time clock,
you must first create a profile for the clock within the TimeForce pro-
gram. Clock profiles are created from the main “Clocks” section of the
TimeForce software.
Note: The following instructions focus primarily on IQ 300, 400 and
500 model clocks. See page 51 for detailed instructions on setting up an
IQ 1000 clock profile.
1. Open the TimeForce software and log in as a user with administra-
tive rights.
2. Click on the main “Clocks” navigation tab at the top of the screen.
3. To create a new clock profile, click on the [ADD CLOCK] icon
located under the
New Clocks header on the left-hand side of the
screen.