InfiniSource ETC 100, Hardware Manual

Page: 45 / 234

TimeForce II Hardware Guide 33
IntelliClock Setup Instructions
Uploading the Date and Time
Before you can begin using your time clock, you must first upload the
date and time to the clock using the ClockLink utility.
Note: Before you will be able to upload the date and time, you must first
create a time clock profile in TimeForce II for each clock that you
would like to connect to. See “Creating a Time Clock Profile” on
page 17 for more information.
1. Open the ClockLink utility. From the Windows Start Menu go to
Programs | TimeForce II and click on “ClockLink.”
2. Each time clock that has been set up in the TimeForce software is
listed in the left-hand section of the screen. Highlight the clock that
you would like to upload the date and time to and click on the
“Connect” link.
3. Once communication has been established with your time clock,
the right-hand section of the screen opens. From the row of tabs at
the top of the screen, ensure that [PARAMETERS] is selected.
4. From the Actions section of the screen, click on the
icon. The “Upload Date/Time” screen opens.
• Enter the desired Date . By default this field is populated with
the system date of the machine that the ClockLink is installed
on. Click on the down-arrow icon at the end of the field to
select the date from a calendar.
• Enter the Time . By default this field is populated with the sys-
tem time of the machine that ClockLink is installed on. Click
on the up and down arrow keys at the end of the field to select
the time, or place your cursor in the field and manually type the
desired time.
• Put a check mark in the Use System Time option to send the
computer's system date and time to the clock. With this setting
enabled, the “Date” and “Time” fields are grayed-out.
5. Click on the [OK] icon to send the date and time to the clock.
You can now exit the ClockLink utility.