110
Infinisource
Important:
The Ethernet Settings are specific to your Local Area Net-
work. It is highly recommended that you change the default settings.
Infinisource Technical Support cannot supply these settings.
Set IP Address
From the “Ethernet” menu, press 2 for “IP Address.” The following
prompt appears:
SET NEW IP ADDRESS:
NOW:
ENTER NEW IP:
The “NOW” field displays the current IP address. To change the clock
IP address, type in the new address at the clock keypad (remember to
use the period key) and press <ENTER>.
Set Subnet Mask
From the “Ethernet” menu, select 3 for “Subnet Mask.” The following
prompt appears:
SET NEW SUBNET MASK:
NOW:
ENTER MASK:
The “NOW” field shows the current Subnet Mask. To change the mask,
type in the new setting at the clock keypad (remember to use the period
key) and press <ENTER>.
Set Gateway
From the “Ethernet” menu, select 4 for “Set Gateway.” The following
prompt appears:
SET NEW GATEWAY:
NOW:
ENTER GATEWAY IP:
The “NOW” field shows the current Gateway. To change the Gateway,
type in the new setting at the clock keypad (remember to use the period
key) and press <ENTER>.
Summary of Contents for ETC 100
