InfiniSource ETC 100, Hardware Manual

Page: 166 / 234

154 Infinisource
Auto-Enter ID
This option allows you to set the maximum number of digits for an ID.
Example: The “Auto-Enter ID” setting is set to 3. As soon as the third
digit in an ID is entered at the keypad, the punch is automatically
entered (without pressing the <ENTER> key).
Job Key
This option enables the <JOB>, <TASK> and <QTY> keys on model
V850 clocks. These keys are used to add Job Tracking information to
employee punches.
Department Key
This option enables the <DEPT> key on the V850 clock keypad.
Tips Key
This option enables the <TIPS> key on the V850 clock keypad.
Finger ID Devices
This menu allows you to configure the finger ID reader on your clock,
and contains the following options:
1. SHOW SETTINGS
2. ENABLE READER
3. REQ’D FOR MENUS
Show Settings
This option displays the settings that your finger ID device is currently
set to.
Enable Reader
This option allows you to turn finger template verification on or off for
all employees. With this option disabled, no employees will be asked to
place their finger on the sensor when clocking in or out.
When this option is selected, the following prompt appears:
FINGER ID ENABLED?
NOW: YES
*ENTER* WHEN DONE
YES NO
Press the soft key under the “YES” or “NO” option, as desired.