IBM Netfinity 3500 M10, User Handbook Manual

Page: 177 / 268

POST
message
Description
163 The clock is not working correctly.
Action: Set the correct date and time. If the date and time are set correctly and
saved and the 163 error message reappears, replace the battery.
If this does not correct the problem, have the computer serviced.
Note: The computer can be used until it is serviced, but any application
programs that use the date and time will be affected.
164 A change in the memory configuration occurred. This error can be caused by
adding, removing, or incorrectly installing memory.
Note: The server can be used with decreased memory capacity until the error
is corrected.
Action:
1. If you added memory, see “Memory DIMM options” on page 86 to verify
that the new memory is correct for your server and that it is installed
correctly.
2. If you added or removed memory, you must save the new configuration in
the Configuration/Setup Utility program. Refer to the Important text box
on page 22 for further information and instructions on saving the
configuration.
3. Running the diagnostic programs might isolate the location of the problem
DIMM and provide additional information. (See “IBM Enhanced
Diagnostics” on page 191 for information about diagnostic programs
provided with your server.)
If the problem cannot be isolated and corrected, have the computer serviced.
167 A different microprocessor was installed that is not supported by the current
POST/BIOS (system programs).
Action:
1. Download the latest BIOS code from the following Web site:
http://www.ibm.com/pc/support.
2. Update your BIOS by following the instructions in the Readme file that
accompanies the downloaded BIOS code.
If the problem cannot be isolated and corrected, have the computer serviced.
Chapter 6. Solving problems
159