IBM Netfinity 3500 M10, User Handbook Manual, Page: 72 / 268

2. Select Start Options from the Configuration/Setup Utility
program menu.
3. Select Startup Sequence from the Start Options menu.
4. Select the sequence and devices from the choices provided.
5. If Automatic Power On Startup Sequence is Enabled, select the
sequence and devices from the choices provided.
6. Press Esc until you return to the Configuration/Setup Utility
program menu.
7. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu and press Enter.
8. To exit from the Configuration/Setup Utility program, press Esc
and follow the instructions on the screen.
Setting remote administration
If you enable remote administration, you can have your server
system programs, such as POST/BIOS, updated remotely from a
network server. If you have set an administrator password for your
server, it does not have to be entered by the server. Consult your
network administrator for information on setting up your network
server to perform POST and BIOS updates.
To access remote administration:
1. Start the Configuration/Setup Utility program. See “Starting
and using the program” on page 19.
2. Select System Security.
3. Select Remote Administration.
4. Press Enter.
5. To enable update remote administration, select Enabled. To
disable, select Disabled.
6. Press Esc until you return to the Configuration/Setup Utility
main menu.
7. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu.
54
Netfinity 3500 M10 User's Handbook