IBM Netfinity 3500 M10, User Handbook Manual

Page: 213 / 268

Before you begin
Ÿ
Read “Safety information” on page 70 and “Handling
static-sensitive devices” on page 72.
Ÿ
Read the instructions that come with the replacement
battery.
Ÿ
Turn the server and all other connected devices off.
Ÿ
Disconnect all external cables attached to the server and then
remove the server cover (see “Disconnecting cables and
removing the cover” on page 76 if you need additional
information).
For information on locating the battery, see “Identifying parts on the
system board” on page 82.
2
CAUTION:
When replacing the lithium battery, use only IBM Part
Number 33F8354 or an equivalent type battery
recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with
the same module type made by the same manufacturer.
The battery contains lithium and can explode if not
properly used, handled, or disposed of.
Do not:
– Throw or immerse into water
– Heat to more than 100°C (212°F)
– Repair or disassemble
Dispose of the battery as required by local ordinances or
regulations.
Note: In the U.S., call 1-800-IBM-4333 for information about battery
disposal.
Chapter 6. Solving problems
195