IBM Netfinity 3500 M10, User Handbook Manual

Page: 140 / 268

Installing a drive in bay 5 or 6
Bays 5 and 6 can accommodate 3.5-inch hard disk drives only.
Before you begin
Ÿ
Read “Safety information” on page 70 and “Handling
static-sensitive devices” on page 72.
Ÿ
Turn the server and all other connected devices off.
Ÿ
Disconnect all external cables and power cords, and then
remove the server cover (see “Preparing to install and
remove options” on page 75).
Ÿ
Read the documentation that comes with the drive.
Ÿ
Read “Internal drives” on page 110.
1. Determine which drive bay of the lower drive bracket you are
going to use.
2. Remove the lower drive bracket. See “Accessing drive bays” on
page 115.
3. Touch the static-protective package containing the new drive to
any unpainted (bare) metal surface and then remove the drive.
122
Netfinity 3500 M10 User's Handbook