IBM Netfinity 3500 M10, User Handbook Manual

Page: 210 / 268

The downloaded file is self-extracting and will be copied to the
diskette. When the copy completes you have a startable IBM
Enhanced Diagnostics diskette.
Using the diagnostic CD
To start the IBM Enhanced Diagnostics using the CD, do the
following:
1. Turn off your server and any attached devices.
2. Turn on all attached devices; then turn your server on.
3. When you see
Press F1 For Configuration/Setup
, press the F1
key.
4. When the Configuration/Setup Utility menu appears, select
Start Options .
5. From the Start Options menu, select Startup Sequence.
6. Note the device selected as the First Startup Device. Later, you
must restore this setting.
7. Select CD ROM as the First Startup Device.
8. Press Esc two times to return to the Configuration/Setup Utility
menu.
9. Select Save Settings and follow the prompts.
10. Place the IBM Enhanced Diagnostics CD in the CD-ROM drive.
11. Select Exit Setup and follow the prompts. The diagnostics will
load. Follow the instructions on the screen to run the
diagnostics.
Important
When you finish running diagnostics and utilities, remove the
CD from the CD-ROM drive and turn off the server. You must
restore the First Startup Device back to the original setting. Use
steps 2 through 9 of this procedure to do this.
192
Netfinity 3500 M10 User's Handbook