IBM Netfinity 3500 M10, User Handbook Manual

Page: 122 / 268

Installing adapters
Before you begin
Ÿ
Read “Safety information” on page 70 and “Handling
static-sensitive devices” on page 72.
Ÿ
Read the instructions that come with the new adapter.
Ÿ
Turn the server and all other connected devices off.
Ÿ
Disconnect all cables attached to the server and remove the
server cover (see “Preparing to install and remove options”
on page 75).
1. Review the instructions that come with the adapter to determine
if it must be installed in an AGP, ISA, or PCI expansion slot.
2. Remove the access clip on the rear frame by sliding it upward
approximately 12 mm (0.5 in) then slide it to the right until it
comes off.
Access
Clip
104
Netfinity 3500 M10 User's Handbook