IBM Netfinity 3500 M10, User Handbook Manual

Page: 181 / 268

POST
message
Description
662 A diskette drive configuration error occurred.
Action:
1. Verify that the Configuration/Setup Utility program correctly reflects the
number of diskette drives you have installed. (For instructions on using
the Configuration/Setup Utility program, refer to Chapter 3, “Using the
Configuration/Setup Utility Program” on page 17.)
2. If you installed or removed a diskette drive, you must save the new
configuration in the Configuration/Setup Utility program. Refer to the
Important
text box on page 22 for further information and instructions on
saving the configuration.
If this does not correct the problem, have the computer serviced.
762 A math coprocessor configuration error occurred.
Action: Have the computer serviced.
11XX Serial port error (XX=serial port number)
Action: Have the computer serviced.
1762 A hard disk configuration error occurred.
Action:
1. Verify that the Configuration/Setup Utility program correctly reflects the
number of hard disk drives you have installed. (For instructions on using
the Configuration/Setup Utility program, refer to Chapter 3, “Using the
Configuration/Setup Utility Program” on page 17.)
2. If you added or removed a hard disk drive, you must save the new
configuration in the Configuration/Setup Utility program. Refer to the
Important
text box on page 22 for further information and instructions on
saving the configuration.
If the problem cannot be isolated and corrected, have the computer serviced.
Chapter 6. Solving problems
163