IBM Netfinity 3500 M10, User Handbook Manual, Page: 161 / 268

Setting passwords
If you used the Clear CMOS Request jumper to erase lost or forgotten
passwords, configuration and setup information is also erased. You
must reconfigure the server, and reset the power-on and
administrator passwords.
For information on clearing CMOS memory, see “Erasing lost or
forgotten passwords” on page 130.
For more information on password protection and setting the date
and time, see “Instructions for common procedures” on page 41.
To set a power-on or administrator password:
1. Start the Configuration/Setup Utility (see “Starting the
Configuration/Setup Utility program” on page 137).
2. Select System Security from the Configuration/Setup Utility
menu and press Enter.
3. Select Administrator Password or Power-on Password and
press Enter.
4. Type in the new password in the appropriate fields.
5. Select Change Password and press Enter. For more
information, see“Understanding the power-on password” on
page 42 or “Understanding the administrator password” on
page 47.
6. Remember to save the changes when you exit from the
Configuration/Setup Utility program.
Chapter 5. Installing options
143