IBM Netfinity 3500 M10, User Handbook Manual

Page: 253 / 268

Power cord notice
For your safety, IBM provides a power cord with a grounded attachment
plug to use with this IBM product. To avoid electrical shock, always use
the power cord and plug with a properly grounded outlet.
IBM power cords used in the United States and Canada are listed by
Underwriter's Laboratories (UL) and certified by the Canadian Standards
Association (CSA).
For units intended to be operated at 115 volts: Use a UL-listed and
CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or
SJT, three-conductor cord, a maximum of 15 feet in length and a parallel
blade, grounding-type attachment plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U.S. use): Use a UL-listed
and CSA-certified cord set consisting of a minimum 18 AWG, Type SVT
or SJT, three-conductor cord, a maximum of 15 feet in length and a
tandem blade, grounding-type attachment plug rated 15 amperes, 250 volts.
For units intended to be operated at 230 volts (outside the U.S.): Use a
cord set with a grounding-type attachment plug. The cord set should have
the appropriate safety approvals for the country in which the equipment
will be installed.
Appendix B. Product warranties and notices
235