IBM Netfinity 3500 M10, User Handbook Manual

Page: 42 / 268

Exiting from the program
When you finish viewing or changing settings in the
Configuration/Setup Utility program, follow these steps to exit from
the program:
1. Press Esc to return to the Configuration/Setup Utility program
menu. (Depending on where you are in the program, you
might have to press Esc several times to get back to the
Configuration/Setup Utility program menu.)
2. Before you exit from the Configuration/Setup Utility program
menu, select Save Settings if you want to save all settings as
they currently appear. If you do not complete this step, your
settings will not be saved.
3. From the Configuration/Setup Utility program menu, press Esc,
and follow the instructions on the screen.
24
Netfinity 3500 M10 User's Handbook