IBM Netfinity 3500 M10, User Handbook Manual

Page: 22 / 268

Getting started
Before you install hardware and software in your server, you need
to determine the hardware, software, and operating system
requirements for your operating environment. Refer to your
ServerGuide package for details about installing an operating system
and other software. See Chapter 5, “Installing options” on page 67
for instructions on installing hardware in your server.
If you have not already done so, unpack and set up your server.
Refer to the Start Here booklet for instructions. If you are not
installing any optional hardware now, connect the cables and power
cord. Follow the instructions in “Cabling the server” on page 8 or
the Start Here booklet.
Note: After you unpack your server, locate the keys. At the time of
shipment, two keys are attached to the back of the server.
Store the keys in a safe place. If you lose them, you must
order keys from the key manufacturer.
4
Netfinity 3500 M10 User's Handbook