IBM Netfinity 3500 M10, User Handbook Manual

Page: 123 / 268

3. Remove the screw and cover for the appropriate expansion slot.
Expansion
Slot Cover
4. Touch the static-protective package containing the adapter to
any unpainted (bare) metal surface in the server, then remove the
adapter from the package.
5. For full length adapters or adapters with extenders, you must
push the card retainer toward the front of the server until it
latches into a position where you can insert the adapter into the
guides. Then install the adapter into the appropriate slot on the
system board. When the adapter is fully seated, release the
retainer by pushing inward on the latch. Make sure the retainer
holds the adapter securely in place.
Note: AGP graphics adapters must be installed in the top
expansion slot (slot 1).
Chapter 5. Installing options
105