IBM Netfinity 3500 M10, User Handbook Manual

Page: 150 / 268

3. Reconnect the power cord only.
4. Turn the server back on for approximately 10 seconds.
Attention: Do not touch any components while power is on.
5. Turn off the server. CMOS memory is now cleared.
Note: You might not be able to power off with a single touch
of the power switch until POST is nearly complete. Press
and hold the power switch for 5 seconds or unplug the
power cord to power off your server.
6. Move the jumper back to its normal position (pins 1 and 2).
1
2
3
1
2
3
1
2
3
7. Replace the cover and reconnect the rest of the cables.
What to do next:
After clearing CMOS memory, you must reconfigure the server.
After reassembling the server (go to “Completing the installation”
on page 134), use the Configuration/Setup Utility program to reset
the date and time, reset any passwords, and reconfigure the server.
For more information, refer to “Setting passwords” on page 143.
132
Netfinity 3500 M10 User's Handbook