IBM Netfinity 3500 M10, User Handbook Manual

Page: 144 / 268

Installing a security U-bolt
You can add a security U-bolt to the rear of your server. Adding a
U-bolt enables you to add a security cable and lock which helps
prevent hardware theft. After you add the security cable, make sure
that it does not interfere with other cables that are connected to the
server.
Before you begin
Ÿ
Obtain the following:
– A 19-mm (3/4 in.) U-bolt and threaded nuts that fit the
U-bolt
– A security cable
– A lock, such as a combination lock or padlock
– An appropriately sized or adjustable wrench
– A flat-bladed screwdriver
Ÿ
Read “Safety information” on page 70 and “Handling
static-sensitive devices” on page 72.
Ÿ
Turn off the server and all other connected devices.
Ÿ
Disconnect all external cables and power cords, and remove
the server cover (see “Preparing to install and remove
options” on page 75).
126
Netfinity 3500 M10 User's Handbook