IBM Netfinity 3500 M10, User Handbook Manual

Page: 9 / 268

1
DANGER
Electrical current from power, telephone, and
communication cables is hazardous.
To avoid a shock hazard:
– Do not connect or disconnect any cables or
perform installation, maintenance, or
reconfiguration of this product during an
electrical storm.
– Connect all power cords to a properly wired and
grounded electrical outlet.
– Connect to properly wired outlets any
equipment that will be attached to this product.
– When possible, use one hand only to connect or
disconnect signal cables.
– Never turn on any equipment when there is
evidence of fire, water, or structural damage.
– Disconnect the attached power cords,
telecommunications systems, networks, and
modems before you open the device covers,
unless instructed otherwise in the installation
and configuration procedures.
– Connect and disconnect cables as described in
the following table when installing, moving, or
opening covers on this product or attached
devices.
Contents
vii