IBM Netfinity 3500 M10, User Handbook Manual

Page: 107 / 268

3. Be sure the retaining clips are in the open position, as shown in
the illustration on the right. If the retaining clips are
perpendicular with the connector, push outward on them until
they click open.
4. Touch the static-protective package containing the DIMM to any
unpainted (bare) metal surface in the server, and then remove the
DIMM.
5. Position the DIMM above the connector so that the two notches
on the bottom edge of the DIMM align properly with the
connector.
6. Firmly push the DIMM straight into the connector until the
retaining clips pop closed and snugly fit around both ends of
the DIMM.
Notches
Chapter 5. Installing options
89