IBM Netfinity 3500 M10, User Handbook Manual

Page: 103 / 268

To replace the air baffle
1. Locate the air baffle as shown below, and attach it to the metal
bar.
2. Rotate the air baffle toward the microprocessor until it is in
position to slide to the rear along the metal bar.
3. Align the two small latches on the air baffle so that they
protrude through the holes on the rear of the server. Press the
latches down while pushing the baffle to the rear until it snaps
into position. Make sure the large latch is latched into the metal
bar.
4. Reconnect any cables that you disconnected from the baffle.
Chapter 5. Installing options
85