IBM Netfinity 3500 M10, User Handbook Manual

Page: 124 / 268

Adapter Card Retainer
6. Install the screw that secures the adapter in the expansion slot.
7. Replace the access clip by sliding it onto the rear frame until it
latches into position.
8. Go to the device-record form (see “Device records” on
page 212) and write the adapter name next to the slot into
which you installed it.
Note: Adapters require system resources. If you add an ISA legacy
adapter, you must use the Configuration/Setup Utility
program to set some previously [Available] resources to [ISA
Resource
]. For more information, see “Legacy adapters” on
page 103.
What to do next:
Ÿ
To work with another option, go to the appropriate section.
Ÿ
To complete the installation, go to “Completing the installation”
on page 134.
106
Netfinity 3500 M10 User's Handbook