IBM Netfinity 3500 M10, User Handbook Manual

Page: 127 / 268

Expansion
Slot Cover
6. Replace the access clip by sliding it onto the rear frame until it
latches into position.
7. Go to the device-record form (see “Device records” on
page 212) and delete the name of the adapter you removed.
Note: Removing an adapter frees up system resources. If you
remove an ISA legacy adapter, you must use the
Configuration/Setup Utility program to set the previously
used resources to [Available]. For more information, see
“Legacy adapters” on page 103.
What to do next:
Ÿ
To work with another option, go to the appropriate section.
Ÿ
To complete the installation, go to “Completing the installation”
on page 134.
Working with internal drives
This section provides information and instructions for installing and
removing internal drives.
When you are installing an internal drive, it is important to note
what kind of drive you can install in each bay and the height
restrictions imposed by each drive bay. Also, it is important to
Chapter 5. Installing options
109