IBM Netfinity 3500 M10, User Handbook Manual

Page: 158 / 268

Changing settings and exiting
In the Configuration/Setup Utility menus, you can accept the
configuration changes by viewing and saving the changes, or you
can make manual changes and then save the settings.
The following is a quick reference for identifying symbols in the
Configuration/Setup Utility program. For information on the
function of keys, see Chapter 3, “Using the Configuration/Setup
Utility Program” on page 17.
Ÿ
If a bullet (
Ÿ
) is beside a menu item, then an additional menu is
available.
Ÿ
Most information enclosed in brackets ([ ]) can be changed. You
cannot change information that is not surrounded by [ ].
Ÿ
A right arrowhead (
→
) beside a menu item indicates that a
configuration change occurred in that category. The
→
might
also appear in subsequent menus.
Ÿ
If an asterisk (*) is beside a menu item, then a resource conflict
is detected.
When you complete your changes or finish viewing information,
return to the Configuration/Setup Utility menu and select Save
Settings
to save the changes. From this location, you can exit the
Configuration/Setup Utility program.
To exit from the Configuration/Setup Utility program, follow these
steps:
1. From the Configuration/Setup Utility menu, press Esc.
2. The Exit Setup menu appears. You can save your changes, exit
from the Configuration/Setup Utility program without saving
your changes, or return to the Configuration/Setup Utility
menu. Use the arrow keys to select the desired option and
press Enter.
140
Netfinity 3500 M10 User's Handbook