IBM i 830, Repair Manual

Page: 511 / 1000

v
Concurrent maintenance adapter card – part 04N6092
If SRC prevails, exchange:
v
AC module 1 and 2 USA – part 21H7000
v
World Trade 1PH – part 21H7261
v
Clock card – part CLCKCRD
6. Is the SRC CC00?
No Yes
↓
Exchange AC module 1 and 2 (if installed)
v
USA – part 21H7000
v
World Trade 1PH – part 21H7261
7. Exchange one of the following parts:
Note: For FC 9074, 9079 dual line cord , “Power PIP11” on page 396 must be
performed before replacing parts.
v
For FC 9074, 9079 (single line cord) Battery Charger – part 97H7316
v
For FC 9074, 9079 (dual line cord) AC Module – part 21P6347
v
For Model 840/SB3 processor tower AC Module:
– USA – part 21H7000
– World Trade 1PH – part 21H7261
– World Trade 2PH – part 21H7264
If the problem is not resolved after exchanging the FRUs listed, exchange the
tower card (see TWRCARD) if it was not previously exchanged.
This ends the procedure.
8. Are you working on a FC 5033, 5034, 5035 or 5077 frame?
No Yes
↓
Re-IPL the entire system to restore resources.
If 00AC SRC prevails after the IPL, then return here and continue with
the next step.
9. The failing AC module is on a secondary expansion unit or base I/O unit.
Note: For FC 5074/5079 dual line cord , “Power PIP11” on page 396 must be
performed before replacing parts.
v
FC 5074/5079 (single line cord) – part 97H7316
v
FC5074/5079 (dual line cord) – part 21P6347
v
UPS Base Unit for FC 5033, 5034, or 5035 – part 44H7784
v
FC 5065/5066 – part 97H7316
v
AC Module FC 5071,5073,5077,5081,5083 – part 21H7697
v
AC Module all other FC 5xxx -- part 87G6300
This ends the procedure.
AIRMOVR
An air-moving device may be failing.
Symbolic FRUs
Chapter 3. Problem Isolation Procedures (PIPs), Failing Items, and Symbolic FRU Isolation
497