IBM i 830, Repair Manual

Page: 400 / 1000

↓
Operations Console failed to make a connection because the port is
already being used. Word 18 contains the card position. Disconnect the
active communications session and try using the resource again.
This ends the procedure.
8. Report the problem to you next level of support.
This ends the procedure.
9. Are words 13, 14 and 15 all equal to 00000000?
No Yes
↓
Report the problem to you next level of support.
This ends the procedure.
10.
Is word 13 equal to 00000002?
No Yes
↓
The LAN hardware failed to activate. Replace the LAN IOA being
used.
This ends the procedure.
11. Is word 13 equal to 00000003?
Yes No
↓
Go to step 14 of this procedure.
12. A hardware error occurred. Word 14 contains the error code, (example:
53001A80). Word 15 contains the card position..
Is the error code equal to 53001A80?
Yes No
↓
The LAN adapter hardware is not operational. Replace the hardware
and try again.
This ends the procedure.
13. The network cable is not attached to the LAN adapter, the cable is defective,
or the network is not operational.
This ends the procedure.
14.
Is word 13 equal to 00000004?
No Yes
↓
The console did not respond. Word 14 contains the number of
attempts made. Word 15 contains the card position. The system is
inserted into the network but there is no connection to the client (PC).
Verify the configuration for the network at the system and client;
verify the configuration of Operations Console.
This ends the procedure.
15. Is word 13 equal to 00000005?
No Yes
↓
IP information was received from the console. Word 14 contains the
received IP address. Verify the configuration data for the client (PC) or
verify the configuration for the network.
This ends the procedure.
16. Report the problem to your next level support.
This ends the procedure.
Operations Console PIPs
386
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1