IBM i 830, Repair Manual

Page: 575 / 1000

NTUSER
The Windows NT Server user problem may be caused by:
v
user-initiated action
v
a Windows NT user application
v
no keyboard or mouse attached to the Integrated xSeries Server (IXS)
Refer to the Integration for Windows Server -- Setup information which is located
in the Information Center at http://www.ibm.com/eserver/iseries/infocenter, or
contact your next level of support for assistance.
This ends the procedure.
NTVSCSI
The Windows NT Server Virtual SCSI device driver may be causing the problem.
Refer to the Integration for Windows Server -- Setup information which is located
in the Information Center at http://www.ibm.com/eserver/iseries/infocenter, or
contact your next level of support for assistance.
This ends the procedure.
OPT_CLN
Fiber Optic Cleaning Kit PN 46G6844. Use this kit and the Fiber Optic Cleaning
Procedures in
″
SY27-2604-04 Fiber Optic Cleaning Procedures
″
for all fiber channel
connections such as those used in optical High Speed Link (HSL) connections or
Fibre Channel attached devices.
OPTLCBL
The cabling for an Optical Disk Drive in the Optical Library needs to be checked.
The cabling may be incorrectly installed or defective.
Refer to the 3995 Optical Library Dataserver Maintenance Information Manual for more
information.
This ends the procedure.
OPTLDRV
An Optical Disk Drive in the Optical Library is failing.
Refer to the 3995 Optical Library Dataserver Maintenance Information Manual for more
information.
This ends the procedure.
OPUSER
The failing item indicates that the operator of the system console or the control
panel performed an incorrect action.
Refer to the Information Center at
http://www.ibm.com/eserver/iseries/infocenter.
Symbolic FRUs
Chapter 3. Problem Isolation Procedures (PIPs), Failing Items, and Symbolic FRU Isolation
561