IBM i 830, Repair Manual

Page: 493 / 1000

6. This is a new problem. Use the new reference code to correct the problem (see
“Chapter 2. Unit Reference Codes” on page 59) or ask your next level of
support for assistance.
This ends the procedure.
Failing Items
This table is used to find field replaceable unit (FRU) part numbers identified by a
failing item code. If only a type number is listed, go to the “Type, Model, and Part
Number list” on page 885 to determine the part number.
Failing Item Code
Description/Action If only a type number is listed, go to the “Type, Model, and Part
Number list” on page 885 to determine the part number.
FI00015 FI00015 indicates that a Local Bus Adapter card in a migrated tower is the failing item. See
the
Migrated Expansion Tower Problem Analysis, Repair and Parts failing item table for this
failing item.
FI00017 This failing item is in a migrated tower. See the Migrated Expansion Tower Problem Analysis,
Repair and Parts failing item table for this failing item.
FI00020 FI00020 is not supported on these models. Continue with the next FRU in the list.
FI00021 FI00021 indicates that the combined function I/O processor (CFIOP) is the failing item.
Use the CFIOP type to determine the part number.
FI00022 FI00022 indicates that the Licensed Internal Code for the service processor may be the
failing item.
Ask your next level of support for assistance.
FI00030 FI00030 indicates a main storage card failure.
Power SRC 1xxx-xxxx No FRU replacement.
FI00040 See the symbolic FRU “BACKPLN” on page 504.
FI00047 This failing item is in a migrated tower. See the Migrated Expansion Tower Problem Analysis,
Repair and Parts failing item table for this failing item.
FI00050 See FI00060
FI00055 FI00055 indicates that a primary optical link cable is the failing item.
This is either the optical bus cable for the bus you are working with or its paired bus cable
on the optical link card.
FI00056 FI00056 indicates that any optical bus cable or a missing optical bus wrap connector is the
failing item.
FI00057 FI00057 indicates that the secondary optical link cable is the failing item.
This is the optical cable that runs between the bus expansion adapter cards in two separate
expansion units.
FI00060 FI00060, FI00062, and FI00065 indicate that any card, cable, or card enclosure connected to
the failing SPD bus may be the failing item. This failing item is in a migrated tower. See the
Migrated Expansion Tower Problem Analysis, Repair and Parts failing item table for this failing
item.
FI00062 See FI00060.
FI00065 See FI00060.
Workstation Adapter Console PIPs
Chapter 3. Problem Isolation Procedures (PIPs), Failing Items, and Symbolic FRU Isolation
479