IBM i 830, Repair Manual

Page: 228 / 1000

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
7115 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The IOP identified in word 5 is not reporting to the secondary
partition. Removing an IOP hardware driver (not the load source for the
current IPL) from the Primary partition failed. The IPL will continue, but
the secondary partition will not be able to establish connections to this IOP.
Word 3: Bus, Word 4: Board, Word 5: Card.
FI00099
LPARSUP
7117 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The IOP identified in word 5 is not reporting to the secondary
partition. Removing the IOP hardware driver that is associated with the
current load-source has failed. The IPL will fail.
Read and understand the information about logical partitions. See the
iSeries Service Functions information.
Record the SRC. The location of the IOP is in SRC words 3, 4 and 5. Word
3: Bus, Word 4: Board, Word 5: Card.
FI00099
LPARSUP
7200 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. An error condition was encountered when communicating with
the load source IOP for the partition identified in the xx field of the B2xx
SRC.
LPARSUP
8081 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. An internal LIC timeout has occurred. The partition may
continue to IPL but it may experience problems while running.
LPARSUP
8105 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was a failure loading the VPD areas of the secondary
partition. The load-source media has been corrupted. A SLIP install of the
partition is required.
MEDIA
FI00099
8107 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was a problem getting a segment of main storage in the
Primary partition’s main store.
FI00099
8115 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was a low level partition to partition communication
failure. A secondary partition re-IPL is necessary to recover.
If this SRC appears again when the partition is re-IPLed contact your next
level of support.
LPARSUP
B2xx
214
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1