IBM i 830, Repair Manual

Page: 261 / 1000

Reference
Code Description/Action Perform all actions before exchanging
Failing Items Failing Item Location
4713 Incorrect Processor Capacity Card installed.
The Processor Capacity Card is the failing item since it has
been swapped in from a different system.
Put the Procesor Capacity Card back in the system it came
from, and re-install this system’s original Processor Capacity
Card.
CTLPNCD N02-B
4714 Processor Capacity card replaced on unactivated POD system.
Processor Capacity Card replaced on unactivated Processor On
Demand System.
Contact your service provider.
4715 Processor On Demand error detected.
Correct any Processor Capacity card or SPCN failures.
CTLPNCD N02-B
4730 Processor On Demand error detected.
Processor On Demand standby processors are in use.
Contact your service provider.
AJDG301
4731 Processor On Demand error detected.
The Processor On Demand Trial Activation period is not valid.
Contact your next level of support.
AJDG301
4733 Processor On Demand error detected.
Contact your service provider.
AJDG301
4740 Processor On Demand error detected.
The Processor On Demand Activation code just entered is not
valid.
Contact your next level of support.
AJDG301
4741 Processor On Demand error detected.
A nonvalid Processor On Demand Activation code has been
entered more than 5 consecutive times.
Contact your service provider.
AJDG301
4745 Processor Capacity card replaced on activated POD system.
Contact IBM Support to order a replacement Processor On
Demand activation code.
4747 1 hour left in POD 14 day Trial Activation Period.
If a new activation code was purchased, it should be entered
now. Otherwise, the system will revert back to its previous
activation state at the end of the Trial Activation Period.
B6xx (including A6xx)
Chapter 2. Unit Reference Codes
247