Hamilton Jet HTX30, Product Manual

Page: 99 / 182

HTX30 Product Manual Fault Finding
6-7
Name SCP text Description Priority
Parameters
inconsistent
PARAM / INCON Some of the parameters on this module are inconsistent with each
other.
Subcodes:

1 - User throttle calibration: The throttle calibration values are
inconsistent. The 40 %, 70 %, and 90 % values must be in
increasing order

101 - Ship throttle calibration: The throttle calibration values
are inconsistent. The 40 %, 70 %, and 90 % values must be in
increasing order

600 - Idle maximum: The maximum idle adjust RPM is
inconsistent with the minimum or maximum RPM

601 - Maximum RPM: The maximum RPM is inconsistent with
the minimum RPM

602 - RPM lookup: One of the RPM to throttle lookup is
inconsistent
Alarm
Character alarms
Name SCP text Description Priority
Character ROM
error
CHAR / FAULT Character ROM error, unable to read either due to corruption, or
missing
Subcodes:

0 - Params

1 - Factory defaults

2 - Ship defaults

3 - Id

4 - Param set

5 - Ship set
Alarm
Character ROM
changed
CHAR / CHANGE The character ROM has been changed Alarm
Character ROM
defaulted
CHAR / DEFLT The character ROM has had a corruption, or was empty, it has
been defaulted to the modules best knowledge
Subcodes:

0 - Params

1 - Factory defaults

2 - Ship defaults
Alarm
JIM alarms
Name SCP text Description Priority
Steering
feedback
STEER / FDBCK Steering feedback out of range Alarm
Reverse
feedback
REVRS / FDBCK Reverse feedback out of range Alarm
SCP demand
lost
DEMND / LOST Loss of SCP demand Alarm
Unable to steer
to port
STEER / STUCK Follow up alarm steering to port Alarm
Unable to steer
to starboard
STEER / STUCK Follow up alarm steering to starboard Alarm
Unable to
lower reverse
REVDN / STUCK Follow up alarm reverse moving reverse duct down Alarm
Unable to raise
reverse
REVUP / STUCK Follow up alarm reverse moving reverse duct up Alarm
JHPU
temperature
JHPU / TEMP JHPU Temperature out of range Warning
JHPU level JHPU / LEVEL
JHPU oil level out of range Warning
Bearing
temperature
BERNG / TEMP Bearing temperature out of range Warning