Hamilton Jet HTX30, Product Manual

Page: 53 / 182

HTX30 Product Manual Commissioning
5-11
Station control panel - advanced set up
Lockable:

This control panel to be lockable, thereby not
allowing other panels to take control.

Do not select this option for vessels with only one
control panel.
Key beeps:

The sounder at this panel will beep when buttons
on the panel are pressed.
Backlight can turn off:

The backlight on this panel will turn off after a
period of inactivity.
Backlight compensation:

The brightness of the backlight automatically
adjusts for changes in the supply voltage.

Do not select this option for vessels which have a
built in voltage booster.
Allow engine sync:

Allows engine synchronization from this panel.

Set the port and starboard engine demands to the
same value by pressing the RPM+ and RPM-buttons
at the same time.
Engine sync margin:

Only used if "allow engine sync" is checked.

The maximum percentage by which the throttle
demands from the main throttle controller can vary
before engine sync is disabled.
Maximum idle engine demand:

Is a percentage of the maximum demand that can
be sent to the engines

Sets the maximum demand signal that can be set
using the RPM+ and RPM- buttons when the vessel
is at zero speed.
e.g.
If this value is set to 100, the RPM+ and RPM-
buttons will be able to set the idle throttle up to
100% of maximum throttle.
If this value is set to 40, the RPM+ and RPM-
buttons will be able to set the idle throttle up to
40% of maximum throttle.
Reverse duct steering assist level:

Set the reverse duct steering assist level for this
station control panel.
Click Next to save settings and continue.