Hamilton Jet HTX30, Product Manual

Page: 65 / 182

HTX30 Product Manual Commissioning
5-23
Jet setup

Ensure that the waterjet steering nozzles and position sensors have been correctly set up and centred as
described in the waterjet product manual.

If not already running, start the blue ARROW Support Tool.

Double click on Setup the Modules or click the Jump to.. and select Setup the Modules , then click OK.
Select
Set up the following modules
, and select the
JIM
.
Make sure that hydraulic power is available.

Select
Powered
for the calibration type.

Click
Next
to start calibration.
Make sure the jet units are free of obstructions.

Click OK to continue.
Most of the jet interface module settings will be
automatically configured.

Click the abort button at any time to cancel
configuration.

A progress bar indicates setup progress.

The configuration correctly sets values for the
steering deadband and limits, and the reverse duct
deadband and limits.