Hamilton Jet HTX30, Product Manual

Page: 126 / 182

Appendix HTX30 Product Manual
8-12
Rubber toughened adhesive
Loctite Colour Primer, activator, accelerator Loctite cure speed
480
Black Type Drying time Partial Full
n/a n/a 2 minutes 24 hours
Clean grease from bond surfaces.
1- Apply to one of the bonding surfaces.
Join surfaces and hold together for at least 30 seconds.
Excess adhesive can be dissolved with Loctite cleanup solvents,
nitromethane or acetone.
Adhesive
Loctite Colour Primer, activator, accelerator Loctite cure speed
406
White Type Drying time Partial Full
Primer 770 30 seconds 60 seconds 24 hours
Particularly suited for bonding porous or absorbent materials such as
wood, paper, leather, fabric.
When surfaces are difficult to bond (low energy plastic surfaces) apply
primer to one surface. Allow primer to dry.
1- Apply Loctite 406 to one surface.
Wicking thread locker
Colour Primer, activator, accelerator Loctite cure speed
290
Green Type Drying time Full
Without activator 12 hours
Activator 7471
(optional)
30-70 seconds With activator 7471 6 hours
Activator 7649
(optional)
30-70 seconds With activator 7649 1 hour
Wicks between engaged threads, do not need to disassemble joint prior to
application. Medium to high strength. Use activator when cure time is
unacceptably long or large gaps are present.
1- Prior to assembly, clean all threads (bolt and hole) with a Loctite
cleaning solvent. Allow to dry.
2- Apply several drops of product at screw and body juncture.