Hamilton Jet HTX30, Product Manual

Page: 172 / 182

Appendix HTX30 Product Manual
8-58
Sensor group
Short name: Sensr
Name SCP text Description Min Max Default Units Access
Has DGPS
corrections
DGPS? Set if the installation has a DGPS correction service
connected to the GPS. If set, an alarm activates if the
correction service is missing:

0 = no DGPS connected.

1 = DGPS connected.
0 1 1 C
Antenna X offset X Off GPS X offset from vessel origin. -32000 32000 0 mm C
Antenna Y offset Y Off GPS Y offset from vessel origin. -32000 32000 0 mm C
Antenna Z offset Z Off GPS Z offset from vessel origin. -32000 32000 0 mm C
JACM orientation SkmOr The JACM's orientation within the vessel. Affects roll
and pitch control:

At = Facing STBD cables down.

Po = Facing PORT cables down.

Ah = Facing AHEAD cables down.

As = Facing ASTERN cables down.

De = On DECK cables aft.

Dh = On DECKHEAD cables aft.
refer to section: JETanchor Control Module Installation
("JETanchor control module" on Page 4-7).
C
Waterjet group
Short name: W Jet
Name SCP text Description Min Max Default Units Access
Jet model JtMdl Type of jet unit:

21 = HJ213

24 = HJ241

27 = HJ274

29 = HJ292 or HJX29

30 = HTX30

32 = HJ322

36 = HJ364

40 = HJ403

42 = HJ421

46 = HJ461
C
Jet X offset jX Fore/Aft distance of the waterjet thrust points from the
vessel origin (negative).
-20000 -500 -3240 mm C
Jet spacing jS Distance between waterjet shafts. 500 20000 936 mm C
Impeller rating ImpRt Impeller rating. 160 65500 186 W*100 C
Deadrise Drise Vessel deadrise at transom. 0 32000 0 milli
degrees
C
Zero speed
correction port
ZrSdP Zero speed correction applied to the the reverse lookup
table for the port waterjet.
-15000 15000 0 %/100 F
Zero speed
correction starboard
ZrSdS Zero speed correction applied to the the reverse lookup
table for the starboard waterjet.
-15000 15000 0 %/100 F
Maximum
JETanchor RPM
MxJAR Maximum engine rpm that JETanchor can demand. 300 6000 1000 rpm C
Maximum RPM Maxim Maximum engine rpm. This should match the equivalent
maximum rpm parameter set in each engine interface
module.
1300 6000 4000 rpm C