Hamilton Jet HTX30, Product Manual

Page: 51 / 182

HTX30 Product Manual Commissioning
5-9
Station control panel set up
Set the following:

Number of jets.

If an autopilot is attached to this control panel,
check the Has an autopilot checkbox.

User level setup password. This allows user level
access to the control panel setup.

Registration code for the vessel. This will be
provided once commissioning is completed.

Sounder profile for this control panel.
Events
Will sound for any warning or alarm that may occur
during vessel operation.
Alarms
Will sound for alarms that occur during vessel
operation, and not for minor warnings.
Logger
All warnings and alarms will be recorded by an
external logger.

Helm curve for the main helm controller at this
control panel. Sets helm sensitivity. Can be
reconfigured when the vessel is in the water.

Throttle curve for dual lever module at this control
panel. Sets throttle sensitivity. Can be reconfigured
when the vessel is in the water.

DLM-C width for the dual lever module at this
control panel. Can be reconfigured when the vessel
is in the water.
Click Next to save the settings and continue.