Hamilton Jet HTX30, Product Manual

Page: 43 / 182

HTX30 Product Manual Commissioning
5-1
5 - Commissioning
In this section
Before launch setup............................................................................................................... 5-1
The blue ARROW support tool .............................................................................................. 5-1
Start a new commissioning ................................................................................................... 5-2
System checks ........................................................................................................................ 5-21
Jet setup ................................................................................................................................ 5-23
After operation ...................................................................................................................... 5-28
System registration ................................................................................................................ 5-28
JETanchor commissioning ..................................................................................................... 5-28
This section describes how to commission the blue ARROW control system. For information on
commissioning the waterjet, see the waterjet's product manual.
Before launch setup
Spiral wrap protects all cylinder shafts during shipping. Carefully remove the wrap before
first operation.
Before sea trials, the modules need to be configured and calibrated. This is done using the blue ARROW
Support Tool.
A complete list of configurable parameters can be found here (
► page 8-36).
The blue ARROW support tool
blue ARROW is configured using the blue ARROW Support Tool.
Before use, install and activate the Support Tool.
To start the SupportTool:

On the Desktop Double-click on the blue ARROW Support Tool icon.
or

On the task bar click
Start > All Programs > CWF Hamilton & Co Ltd > blue ARROW Support Tool.