Hamilton Jet HTX30, Product Manual

Page: 88 / 182

Commissioning HTX30 Product Manual
5-46
Error message Comments
JIM 1 reverse stuck. Cannot
commence Autotune
or
JIM 2 reverse stuck. Cannot
commence Autotune

Autotune cannot start because the indicated propulsion line's
reverse duct is stuck

Ensure all reverse ducts are operational before starting
Autotune
JIM 1 steering stuck. Cannot
commence Autotune
or
JIM 2 steering stuck. Cannot
commence Autotune

Autotune cannot start because the indicated propulsion line's
steering nozzle is stuck

Ensure that all steering nozzles are operational before starting
Autotune
Port engine RPM is no longer
following up

Autotune cannot start because port engine rpm is not
responding to throttle demand

Locate and resolve the throttle demand fault, then restart the
auto tune procedure
Port gearbox is not engaged. Cannot
commence Autotune

Autotune cannot start because at the port gearbox is not
engaged

Ensure that the gearboxes are engaged in drive before starting
Autotune
Port waterjet is not ready. Cannot
commence Autotune

Autotune cannot start because the port waterjet is not ready
for operation

Ensure that:

The waterjet has been installed and set up

The waterjet's engine is running and its gearbox is engaged

No systems are under local control

The blue ARROW system is fault free
SCP is in backup mode. Cannot
commence Autotune

Autotune cannot start because the blue ARROW system is in
backup mode

Ensure that all propulsion lines are in normal mode before
starting Autotune
SCP is in setup mode. Cannot
commence Autotune

Autotune cannot start because the blue ARROW system is in
setup mode

Ensure that all normal blue ARROW set up has been completed
before starting Autotune. Set up is performed using the Support
Tool
Stbd engine RPM is no longer
following up

Autotune cannot start because starboard engine rpm is not
responding to throttle demand

Locate and resolve the throttle demand fault, then restart the
auto tune procedure
Stbd gearbox is not engaged.
Cannot commence Autotune

Autotune cannot start because at the starboard gearbox is not
engaged

Ensure that the gearboxes are engaged in drive before starting
Autotune