Hamilton Jet HTX30, Product Manual

Page: 120 / 182

Appendix HTX30 Product Manual
8-6
Painted gloss bores, stainless steel bushes
Loctite Colour Primer, activator, accelerator Loctite cure speed
680
Green
Type Drying time Partial Full
Primer 7471 30-70 seconds 5 minutes 4-6 hours
Bushes, sleeves, composite bush assemblies (extra high strength retaining).
Use primer in all retaining applications.
Do not apply primer to painted bore.
1 - Apply a coat of primer to the outside surface of the bush. Allow to dry.
2 - Apply Loctite to whole surface of the bore and outside of the bush before
fitting.

There are to be NO dry areas between the bush and the bore once assembled.

Rotate the bush when fitting to distribute the Loctite evenly.
Painted gloss bores, LG2 bushes
Loctite Colour Primer, activator, accelerator Loctite cure speed
680
Green
Type Drying time Partial Full
n/a n/a 5 minutes 4-6 hours
Bushes, sleeves, composite bush assemblies (extra high strength retaining).
1 - Apply Loctite to whole surface of the bore and outside of the bush before
fitting.

There are to be NO dry areas between the bush and the bore once assembled.

Rotate the bush when fitting to distribute the Loctite evenly.
Studs
Loctite Colour Primer, activator, accelerator Loctite cure speed
263
Red Type Drying time Partial Full
Primer 7649 30-70 seconds With primer 10 minutes 2 hours
(optional) n/a Without primer 20 minutes 6 hours
Studs (high strength locking).
Use primer to improve cure reliability and reduce cure time.
1 - Apply optional primer to the thread of the stud. Allow to dry.
2 - Apply several drops of thread locker down the sides of female thread.
3 - Apply Loctite to the thread engagement area of the stud in sufficient
quantity to fill all engaged threads.
Assemble the stud to specifications.