Hamilton Jet HTX30, Product Manual

Page: 119 / 182

HTX30 Product Manual Appendix
8-5
Unpainted bores, stainless bushes
Loctite Colour Primer, activator, accelerator Loctite cure speed
680
Green
Type Drying time Partial Full
Primer 7471 30-70 seconds 5 minutes 4-6 hours
Bushes, sleeves, composite bush assemblies (extra high strength retaining). Use primer in all
retaining applications.
1 - Apply primer to whole surface of bore. Allow to dry before fitting.
2 - Apply Loctite to whole surface of the bore and outside of the bush before fitting.

There are to be NO dry areas between the bush and the bore once assembled.
Rotate the bush when fitting to distribute the Loctite evenly.
For press fitted bushes, coat the entire bush and bore before pressing in the bush.
Unpainted bores, LG2 bushes
Loctite Colour Primer, activator, accelerator Loctite cure speed
680
Green
Type Drying time Partial Full
Primer 7471 30-70 seconds 5 minutes 4-6 hours
Bushes, sleeves, composite bush assemblies (extra high strength retaining). Use primer
in all retaining applications.
Do not apply primer to LG2 bushes.
1 - Apply primer to whole surface of bore. Allow to dry before fitting.
2 - Apply Loctite to whole surface of the bore and outside of the bush before fitting.

There are to be NO dry areas between the bush and the bore once assembled.

Rotate the bush when fitting to distribute the Loctite evenly.
For press fitted bushes, coat the entire bush and bore before pressing in the bush.
Painted intercure bores, stainless steel bushes
Loctite Colour Primer, activator, accelerator Loctite cure speed
325
Amber Type Drying time Partial Full
Activator 7387, or
Activator 7075
1-3 minutes 5 minutes 24 hours
Bushes, sleeves, composite bush assemblies (high strength retaining). Use activator in
all retaining applications
Loctite 325 will not cure without the Activator. Do not apply activator to painted bore.
1 - Apply a coat of activator to the outside surface of the bush. Allow to dry.
2 - Apply Loctite to whole surface of the bore and outside of the bush before fitting

There are to be NO dry areas between the bush and the bore once assembled.

Assemble immediately (within 1 minute). Rotate the bush when fitting to distribute the
Loctite evenly.