Hamilton Jet HTX30, Product Manual

Page: 132 / 182

Appendix HTX30 Product Manual
8-18
Hose clips
Part # Size Torque
201056 12-20 2.3 N·m (1.7 lbf ft)
201057 14-32 4 N·m (3 lbf ft)
201058 30-45 5 N·m (3.7 lbf ft)
201059 40-60 5 N·m (3.7 lbf ft)
205780 50-70 5 N·m (3.7 lbf ft)
201060 60-80 5 N·m (3.7 lbf ft)
206094 80-100 5 N·m (3.7 lbf ft)
64924 51-55 15 N·m (11 lbf ft)
209872 59-63 15 N·m (11 lbf ft)
Thread lubricants
Thread type Description of lubricant where the thread lubricant or
Loctite is not specified
Nuts on 316 stainless studs Multipurpose marine grade grease.
Nuts on high strength studs Multipurpose marine grade grease or marine grade anti-seize.
Anti-seize will reduce the risk of thread galling so is recommended, particularly on
larger or longer studs.
1/4" UNC - 1/8" UNC Multipurpose marine grade grease.
3/4" UNC Marine grade anti-seize.
Bronze impeller or coupling nuts Multipurpose marine grade grease.
Hydraulic fittings General purpose grease with PTFE base or hydraulic oil.
For example: Accrolube ® high efficiency grease with PTFE (grease must not contain
graphite).
Fasteners inside sealed control modules No lubricant, fit dry.
Plastic male or female threads No lubricant, fit dry.
Other metric fasteners Multipurpose marine grade grease.
Examples
Multipurpose marine grade
lithium based grease or
calcium sulphate based
grease.
Shell: Shell Alvania RL2
Mobil: Mobilux 2, Mobilux EP 2
Castrol: Molub - Alloy 6040
BP: Engergrease MP-MG 2
Marine grade anti-seize Use only Loctite marine grade anti-seize.
Anti-seize compounds
Do not use anti-seize compounds that contain graphite, nickel, copper or metal flake. They cause
corrosion.
Anti-seize compounds, usually containing zinc flakes, are available for aluminium.
Only use
Loctite marine grade anti seize
when using anti-seize on nuts fitted to high strength studs to
achieve the correct stud preload.
blue ARROW module dimensions
The following drawings show module dimensions and panel cutout sizes.
A full size cutout template is enclosed with the module packaging.
Allow adequate clearance beneath the console mounted modules to allow for the cable to connect to the
module
Minimum recommended clearances below modules measured from the top of the console:

Station control panel - 240 mm

Dual lever module - 150 mm

Helm wheel module - 180 mm

Mouseboat - 160 mm