Hamilton Jet HTX30, Product Manual

Page: 165 / 182

HTX30 Product Manual Appendix
8-51
Save and reload group
Short name: Save / Relod
Name SCP text Description Min Max Default Units Access
Load factory values LoadF Copies the factory parameters to the user space, this
will default all user settings
D
Save to ship Save Sets the ship defaults, used at the end of commissioning D
Save to Character
Factory
SaveC Sets the factory defaults of the character rom F
Save Rom Defs to
Character Factory
SaveR Sets the factory defaults of the character rom to the
hard coded Rom defaults, i.e total reset
F
Clear Defaults Alarm Clear / Defs Clears the Default Alarm orginating from the Character
Rom
D
Commissioning group
Short name: Comsn
Name SCP text Description Min Max Default Units Access
Drive port DPort Unconditionally drives the steering nozzle to port, no
deadband compensation
C
Drive stbd DStbd Unconditionally drives the steering nozzle to stbd, no
deadband compensation
C
Drive up DUp Unconditionally drives the reverse duct up, no
deadband compensation
C
Drive down DDown Unconditionally drives the reverse duct down, no
deadband compensation
C
Str raw Fbk SRaw Steering raw feedback, no scaling C
Rev raw Fbk RRaw Reverse raw feedback, no scaling C
Rpm logic state Rpm Indicates the current logic state of the RPM sender C