Hamilton Jet HTX30, Product Manual

Page: 161 / 182

HTX30 Product Manual Appendix
8-47
JIM parameters
Top level parameters
Name SCP text Description Min Max Default Units Access
Software version SWVer U
Boot block software
version
BbVer F
Backup software
version
BkVer F
Amendment Amend U
PCB amendment PCBAm F
Jet model JtMdl The model number of the jet 0 10000 0 U
Jet type rev JtRev A revision number of the character param defaults for
this jet type
0 200 1 D
Steering enabled Str / Enab Enables the steering nozzle hydraulic control 0 1 1 D
Reverse enabled Rev / Enab Enables the reverse duct hydraulic control 0 1 1 D
Calibration type Calib / Type Sets the calibration type, either powered or unpowered:
Po = Powered
Un = Unpowered
U
Load ship values Load Copies the ship defaults to the user space, this brings
the parameters back to settings as used in
commissioning
U
Unpowered calibration group
Short name: Unpwr / Calib
Name SCP text Description Min Max Default Units Access
Limit port Str / Port Calibrates the steering port limit U
Limit stbd Str / Stbd Calibrates the steering stbd limit U
Steering mid Str / Mid Calibrates the steering mid position U
Limit up Rev / Up Calibrates the reverse up limit U
Limit down Rev / Down Calibrates the reverse down limit U
Zero speed Zero / Spd Calibrates the reverse zero speed position U
Powered calibration group
Short name: Pwred / Calib
Name SCP text Description Min Max Default Units Access
Deadband
port
DbPrt Hydraulic valve deadband drive value,
when driving in the port direction
5 75 40 drive U
Deadband
stbd
DbStb Hydraulic valve deadband drive value,
when driving in the stbd direction
5 75 40 drive U
Deadband up DbUp Hydraulic valve deadband drive value,
when driving in the up direction
5 75 40 drive U
Deadband
down
DbDwn Hydraulic valve deadband drive value,
when driving in the down direction
5 75 40 drive U
Limit port Lmt / Port Steering feedback limit when fully to
Port
JPARAM_STR_P
ORT_MIN
0x600 (JPARAM_STR_PO
64 )
none U
Limit stbd Lmt / Stbd Steering feedback value when fully to
Stbd
0xA00 JPARAM_STR_S
TBD_MAX
(JPARAM_STR_STB
D_MAX - 64 )
none U
Steering mid Mid Steering feedback value when in centre
position, i.e. straight ahead
0x300 0xC00 0x800 none U
Limit up Lmt / Up Reverse feedback value when fully in
the up position
0xA00 JPARAM_REV_
UP_MAX
(JPARAM_REV_UP
_MAX - 64 )
none U
Limit down Lmt / Down Reverse feedback value when fully in
the down position
JPARAM_REV_
DOWN_MIN
0x600 (JPARAM_REV_DO
64)
none U
Zero speed Zero / Spd Reverse feedback value equal thrust is
going forward and reverse, i.e the boat
is at zero speed
0x180 0xB00 0x600 none U