Fuji Xerox DocuPrint CM215 series Page 328 User Manual Download

Page: 328 / 452

328

Using the Operator Panel Menus and Keypad

• Color Balance G

Purpose:
To specify the default color balance level of green within the range of -2 to +2. The factory default
menu setting is 0.

• Color Balance B

Purpose:
To specify the default color balance level of blue within the range of -2 to +2. The factory default menu
setting is 0.

• Gray Balance

Purpose:
To specify the default gray balance level within the range of -2 to +2. The factory default menu setting
is 0.

NOTE:

•

This option is effective only for black and white copying.

• N-Up

Purpose:
To print two original pages to fit onto one sheet of paper.
Values:

• Margin Top/Bottom

Purpose:
To specify the value of the top and bottom margins.
Values:

• Margin Left/Right

Purpose:
To specify the value of the left and right margins.
Values:

Off

Does not perform

N-Up

printing.

Auto

Automatically reduces the original pages to fit onto one sheet of
paper.

ID Card Copy

Prints the original pages onto one sheet of paper in the original size.

Manual

Prints the original pages onto the one sheet of paper in the size
specified in

Reduce/Enlarge

4mm

/0.2 inch

Specify the value in increments of 1 mm/0.1 inch.

0-50mm/0.0-2.0 inch

4mm

/0.2 inch

Specify the value in increments of 1 mm/0.1 inch.

0-50mm/0.0-2.0 inch

Summary of Contents for DocuPrint CM215 series




































































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM215 series

Reviews:

Related manuals for DocuPrint CM215 series

Brands by name

Popular brands

Fuji Xerox DocuPrint CM215 series, User Manual

Search results

Summary of Contents for DocuPrint CM215 series

Reviews:

Related manuals for DocuPrint CM215 series

Brands by name

Popular brands