Fuji Xerox DocuPrint CM215 series User Manual Download Page 304

Page: 304 / 452

304

Using the Operator Panel Menus and Keypad

• TCP/IP

Purpose:
To configure

TCP/IP

settings. The change becomes effective after the printer is turned off and then on.

Values:

NOTE:

•

When you set an IP address in IPv6 mode, use the

CentreWare Internet Services

. For more information, refer

to the

Help

on the

CentreWare Internet Services

• Protocol

Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and
then on.
Values:

IP Mode

Dual Stack

Uses both IPv4 and IPv6 to set the IP address.

IPv4 Mode

Uses IPv4 to set the IP address.

IPv4

Get IP
Address

DHCP/AutoIP

* Automatically sets the IP address.

BOOTP

Uses BOOTP to set the IP address.

RARP

Uses RARP to set the IP address.

DHCP

Uses DHCP to set the IP address.

Panel

Enables the IP address entered on the

operator

panel

IP Address

Manually sets the IP address allocated to the
printer.

Subnet Mask

Manually sets the subnet mask.

Gateway Address

Manually sets the gateway address.

LPD

Disable

Disables the Line Printer Daemon (LPD) port.

Enable

Enables the LPD port.

Port 9100

Disable

Disables the Port 9100 port.

Enable

Enables the Port 9100 port.

WSD

Disable

Disables the Web Services on Devices (WSD) port.

Enable

Enables the WSD port.

SNMP

Disable

Disables the Simple Network Management Protocol (SNMP)
UDP port.

Enable

Enables the SNMP UDP port.

StatusMessenge
r

Disable

Disables the

StatusMessenger

feature.

Enable

Enables the

StatusMessenger

feature.

Internet
Services

Disable

Disables an access to the

CentreWare Internet Services

embedded in the printer.

Enable

Enables an access to the

CentreWare Internet Services

embedded in the printer.

Bonjour(mDNS)

Disable

Disables the Bonjour (mDNS).

Enable

Enables the Bonjour (mDNS).

Summary of Contents for DocuPrint CM215 series




































































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM215 series

Reviews:

Related manuals for DocuPrint CM215 series

Brands by name

Popular brands

Fuji Xerox DocuPrint CM215 series, User Manual

Search results

Summary of Contents for DocuPrint CM215 series

Reviews:

Related manuals for DocuPrint CM215 series

Brands by name

Popular brands