Fuji Xerox DocuPrint CM215 series User Manual Download Page 116

Page: 116 / 452

116

Printing Basics

Automatic Document Feeder

(

ADF

) Guidelines

(DocuPrint CM215 f/CM215 fw Only)

The

ADF

accommodates the following original sizes:

•

Width: 148–215.9 mm (5.83–8.50 inches)

•

Length: 210–355.6 mm (8.27–14.00 inches)

The weight range includes 60–105 gsm.
Follow these guidelines when loading original documents into the

ADF

•

Load documents face up so that the top of the document enters the printer first.

•

Place only loose sheets of paper in the

ADF

•

Adjust the

document guides

so that they fit against the documents.

•

Insert paper in the

document feeder tray

only when the ink on the paper is completely dry.

•

Do not load documents above the MAX fill line. You can load up to 15 sheets of 64 gsm
documents.

NOTE:

•

You cannot load the following documents in the

ADF

. Be sure to place them on the

document glass

Curled originals

Pre-punched paper

Lightweight originals

Folded, creased or torn originals

Cut and paste originals

Carbon paper

Summary of Contents for DocuPrint CM215 series




































































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM215 series

Reviews:

Related manuals for DocuPrint CM215 series

Brands by name

Popular brands

Fuji Xerox DocuPrint CM215 series, User Manual

Search results

Summary of Contents for DocuPrint CM215 series

Reviews:

Related manuals for DocuPrint CM215 series

Brands by name

Popular brands