Fuji Xerox DocuPrint CM215 series Page 82 User Manual Download

Page: 82 / 452

Printer Connection and Software Installation

Assigning an IP Address Manually

NOTE:

•

Assigning an IP address is considered as an advanced function and is normally done by a system
administrator.

•

Depending on the address class, the range of the IP address assigned may be different. On Class A, for
example, an IP address in the range from

0.0.0.0

127.255.255.255

will be assigned. For assignment

of IP addresses, contact your system administrator.

You can assign the IP address by using the

operator panel

or using the

Printer Setting Utility

For Microsoft

Windows

, you can also assign the IP address to the printer using the installer on the

Software Pack CD-ROM

Using the

Operator Panel

On the

operator panel

, press the

(

System

) button.

Select

Admin Menu

, and then press the

button.

Select

Network

, and then press the

button.

Select

TCP/IP

, and then press the

button.

Select

IPv4

, and then press the

button.

Select

Get IP Address

, and then press the

button.

Select

Panel

, and then press the

button.

Press the

(

Back

) button,

Confirm that

Get IP Address

appears.

Select

IP Address

, and then press the

button.

The cursor is located at the first digit of the IP address.

Enter the value of the IP address using the or button.

Press the button.
The next digit is selected.

Repeat steps

to enter all of the digits in the IP address, and then press the

button.

Press the

(

Back

) button.

Confirm that

IP Address

appears.

Select

Subnet Mask

, and then press the

button.

The cursor is located at the first digit of the subnet mask.

Enter the value of the subnet mask using the or button.

Summary of Contents for DocuPrint CM215 series




































































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM215 series

Reviews:

Related manuals for DocuPrint CM215 series

Brands by name

Popular brands

Fuji Xerox DocuPrint CM215 series, User Manual

Search results

Summary of Contents for DocuPrint CM215 series

Reviews:

Related manuals for DocuPrint CM215 series

Brands by name

Popular brands