Fuji Xerox DocuPrint CM215 series User Manual Download Page 334

Page: 334 / 452

334

Using the Operator Panel Menus and Keypad

• Delayed Start

Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once

Delayed Start

mode is activated, your printer stores all of the documents to be faxed into its memory and sends them
at the specified time. After faxing in the

Delayed Start

mode is complete, the data in the memory is

cleared.
Values:

NOTE:

•

A maximum of 19 delayed fax jobs can be stored in this printer.

Print from USB Defaults

• Layout

Purpose:
To fit print image automatically to one sheet of paper.
Values:

21:00

/PM9:00

Specify the fax transmission start time when sending a fax at a
specified time.

0:00 - 23:59 / AM/PM1:00
- 12:59

Auto

Off

Summary of Contents for DocuPrint CM215 series




































































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM215 series

Reviews:

Fuji Xerox DocuPrint CM215 series, User Manual, Page: 334 / 452

Search results

Summary of Contents for DocuPrint CM215 series

Reviews: