DS Automobiles DS 4 Handbook Download Page 96

Page: 96 / 421

Ease of use and comfort

Additional adjustments

To raise a head restraint, pull it upwards.

To lower the head restraint, press the lug

and the head restraint at the same time.

To adjust the angle of the head restraint, tilt

its lower part forwards or rearwards.

The head restraint is fitted with a frame
with notches which prevents it from
lowering; this is a safety device in case
of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.

Removing a head restraint

To remove the head restraint, press the

lug

and pull the head restraint upwards.

To put the head restraint back in place,

engage the head restraint stems in the
openings keeping them in line with the seat
back and press the lug

at the same time.

Never drive with the head restraints
removed; they must be in place and
adjusted correctly.

Head restraint height and angle

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands