manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 191

06

189

Driving

Starting / Switching off the engine with Keyless Entry and 

Starting

Starting the engine

F

  With a manual gearbox, place the gear 

lever in neutral and declutch fully.

F

  With an automatic gearbox, place the gear 

selector at 

P

 or 

N

 and press the brake 

pedal.

F

  Briefly press the "

START/

STOP

" button while maintaining 

pressure on the pedal until the 
engine starts.

If the electronic key is not detected 
in the zone, a message is displayed. 
Move the electronic key into the zone 
so that the engine can be started.

If one of the starting conditions is not 
met, a reminder message appears in 
the instrument panel screen. In some 
circumstances, it is necessary to 
turn the steering wheel slightly while 
pressing the "

START/STOP

" button 

to assist unlocking of the steering; 
a message warns you when this is 
needed.
The presence of the "Keyless Entry 
and Starting" electronic key in the 
recognition zone is essential.
As a safety measure, do not leave this 
zone with the vehicle running.

Diesel vehicles

In temperatures below zero 
the engine will not start until 
the preheater warning lamp 
has gone off.

If this warning lamp comes on after 
pressing "

START/STOP

", you should 

hold the brake or clutch pedal down 
until the warning lamp goes off and do 

not press the "

START/STOP

" button 

again.

The steering column unlocks and the engine 
starts.
See the advice for Diesel versions.

F

  Place the electronic key inside the vehicle: 

there is no need to place it in the reader.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands